Request a quote
CapabilitiesHow we workSystemsProjectsIndustriesCompanyRequest a quote
Two Tridentec engineers checking a line of blue low voltage switchboards during a factory acceptance test

Automation system integrator

From first drawingto live plant.

Tridentec designs, builds, programs and commissions automation in Singapore: PLC, SCADA and DCS, low voltage switchboards and industrial robots. One team carries the job from start to handover.

6,300Aswitchgear and motor control centres
16kinds of automation system delivered
6PLC platforms programmed in house
2sites: Singapore office, Nantong factory

Platforms

The brands your plant already runs on.

An ABB Authorized Value Provider and a Siemens Solution Partner. We program, supply and support the controllers, drives, robots and SCADA packages below.

ABB, Siemens, Schneider Electric, Allen Bradley, Mitsubishi Electric, WAGO, KUKA, Nachi, AVEVA InTouch, Ignition, FactoryTalk, SIMATIC WinCC

Operators at the control desk of a data centre DCS system delivered by Tridentec

Control systems

SCADA, DCS and PLC, programmed in house.

Our engineers write the PLC logic to IEC 61131, build the operator screens and bring the whole system up on site.

  • AVEVA InTouch, FactoryTalk View, SIMATIC WinCC, Ignition
  • SIMATIC PCS 7 and ABB 800xA for DCS
  • Audit trail, e signature and batch control

In the pictureData centre DCS system

A line up of low voltage motor control centre sections

Switchboards and motor control

Low voltage assemblies up to 6,300 A.

Switchgear, distribution boards and motor control centres, design verified to IEC 61439 and built to your specification.

  • 380, 400 and 690 VAC working voltage
  • Form 2, Form 3 and Form 4 separation
  • Enclosures from IP3X to IP54

In the pictureMotor control centre line up

An open control panel with drives, breakers and terminals wired by Tridentec

Panel fabrication

Built in our own workshops.

Control panels are wired and assembled in facilities we own in Singapore and China, so the build stays under one roof.

  • PLC, remote I/O and relay control panels
  • VFD, DOL and soft starter panels
  • Weatherproof panels and consoles

In the pictureControl panel, wired and labelled

Engineers testing a line of industrial robots and conveyors

Industrial robotics

Robot cells that palletise, pack and tend machines.

Complete robotic systems with ABB, KUKA and Nachi robots, from mechanical design to programming and start up.

  • Case and bag palletising
  • Case packing, pick and place
  • Machine tending

In the pictureRobot line under test

Open control panels with a test laptop during a factory acceptance test

Testing and commissioning

Tested before it ships. Commissioned where it runs.

Factory acceptance tests, site installation and commissioning, with IQ, OQ and PQ documentation where your process needs it.

  • Insulation, continuity and earth testing
  • Primary and secondary injection, load tests
  • PLC, SCADA, DCS and robot commissioning

In the picturePanels on test before delivery

How we work

One line, from tender to handover.

Most projects pass between a designer, a panel builder, a programmer and an installer. Here each stage is done by the same company, so nothing is lost between them.

Talk to an engineer

Tender support

Engineering support while you are still pricing the job, so the system you quote is the system that gets built.

Design

Electrical design to IEC, GB or NEC standards in EPLAN and AutoCAD, with LEW endorsement when the job calls for it.

Build

Switchboards, motor control centres and control panels fabricated and wired in our own facilities.

Program

PLC, HMI, SCADA, DCS and robot programming, plus PC based software in VB, VB.NET and C#.

Install

Power, control, fibre and Ethernet cabling on site. Conveyor and robot mechanical installation.

Commission

Testing, commissioning and qualification to IQ, OQ and PQ, then handover to your operators.

Systems delivered

Sixteen kinds of system, already running.

Our automation and instrumentation engineers plan, design, program, start up and train. These are the systems they have delivered.

  • Fire alarm system
  • Gas detection system
  • Bulk tank monitoring
  • Tank gauging and bubbling system
  • Fuel monitoring system
  • Engine control system
  • CCTV monitoring system
  • HVAC control system
  • Building automation system
  • Process automation system
  • Automatic guided vehicle system
  • Purified water treatment system
  • WFI water treatment system
  • Waste water treatment system
  • Remote I/O system
  • Plant control system
Stainless steel control panel with an operator screen in a plant room
Stainless steel control panel with operator screen, installed and labelled.

Projects

Work we have delivered.

Data centre DCS system

Data centre DCS system

Distributed control system with operator stations and a video wall.

LV switchboard automation system

LV switchboard automation system

JSPL Heerema H 1119. Factory acceptance test.

Oil drumming conveyor system

Oil drumming conveyor system

Roller conveyors for a drum filling line.

Industrial robot system for drumming

Industrial robot system for drumming

A robot cell handling steel drums.

LV switchboard automation system

LV switchboard automation system

Keppel Singmarine, Caspian subsea vessel construction. Commissioning.

Power management system

Power management system

Main switchboard screen: utility incomers, bus tie and five generators.

ABB safety PLC

ABB safety PLC

Safety controller and I/O inside the panel.

Heavy duty conveyor

Heavy duty conveyor

Conveyor built for heavy loads.

PLC and HMI control panel

PLC and HMI control panel

Floor standing control panel on site.

Stainless steel control panel

Stainless steel control panel

Panel with operator screen, installed in a plant room.

Motor control centre

Motor control centre

Sections ready for delivery.

Industries

Where our systems run.

From clean utilities in a pharmaceutical plant to switchboards on an offshore vessel, the engineering is the same discipline applied to a different process.

  • PharmaceuticalPurified water and WFI systems, with qualification documents.
  • Oil and gasProcess control, tank gauging, fire and gas detection.
  • ChemicalPlant control systems and drumming lines.
  • Water treatmentPurified, WFI and waste water treatment control.
  • Building automationHVAC control, CCTV and building management.
  • Warehouse automationConveyors and automatic guided vehicles.
  • Robotic automationPalletising, packing and machine tending cells.

Certified and recognised

Audited, partnered, awarded.

Quality and safety management certified by DNV, and partner status with the manufacturers whose equipment we integrate.

ISO 9001 and ISO 45001, certified by DNV

bizSAFE STAR

ABB Authorized Value Provider, system integrator

Siemens Solution Partner and Service Delivery Partner

Mitsubishi Electric Iconics registered system integrator

BCA registered contractor

Singapore SME 500 award, 2022

Singapore Entrepreneur 100 award, 2020

Our clients

Company

Engineered to an uncompromising standard.

Tridentec Group works across industrial automation and marine and offshore engineering, with building automation, fire detection and control software alongside. The office is in Singapore and the panels are built in our own factory in Nantong, China.

Singapore office

40 Toh Guan Road East, #01-64 Enterprise Hub, Singapore 608582

Nantong factory

No. 97 Zhusong Road, Building 6, Suxitong Industrial Park, Nantong, Jiangsu, China

Switchboard sections lined up in the workshop before delivery

Questions

Before you call.

What does Tridentec do?

Tridentec Group is a system integrator and total automation solution provider in Singapore. We design, build, program, install and commission electrical, control and automation systems: PLC, SCADA and DCS, low voltage switchboards and motor control centres, and industrial robot cells.

Which PLC and SCADA platforms do you program?

PLC and DCS: ABB AC500 and 800xA, Siemens S7 1200, 1500, 300 and 400 and SIMATIC PCS 7, Allen Bradley ControlLogix and CompactLogix, Schneider Modicon, Mitsubishi MELSEC and WAGO 750. SCADA: AVEVA InTouch, FactoryTalk View, SIMATIC WinCC and Ignition. Logic is written to the IEC 61131 standard.

What switchboard ratings can you build?

Low voltage switchgear and motor control centres up to 6,300 A and distribution boards up to 1,250 A, for 380, 400 and 690 VAC. Separation from Form 2 to Form 4 and enclosures from IP3X to IP54. Assemblies are design verified to IEC 61439.

Do you supply and integrate industrial robots?

Yes. We deliver complete robot systems with ABB, KUKA and Nachi robots for case and bag palletising, case packing, pick and place and machine tending, including mechanical design, programming and commissioning.

Can you commission to IQ, OQ and PQ?

Yes. Commissioning of electrical panels, PLC, SCADA, DCS and robot systems can follow installation qualification, operational qualification and performance qualification for regulated processes.

Where are you and when are you open?

40 Toh Guan Road East, #01-64 Enterprise Hub, Singapore 608582. Monday to Friday, 8.30 am to 6 pm. Call +65 6553 9336 or email sales@tridentecgroup.com.

Contact

Tell us what needs to run.

Share the drawings, a specification or just the problem. An engineer will reply with questions and a price.

Office
40 Toh Guan Road East, #01-64 Enterprise Hub, Singapore 608582
Open in Google Maps
Hours
Monday to Friday, 8.30 am to 6 pm

Request a quote

WhatsApp